Browsed by
Tag: bronco top

Bronco Hoist Top: Step-by-Step Guide for Beginners

Bronco Hoist Top: Step-by-Step Guide for Beginners

Are you planning on hoisting your Bronco top? In that case, you need to know about the steps on how to use the Bronco hoist top. Luckily, this article will provide you with a brief summary of what to expect from the process.

Steps on How to Hoist Your Bronco Top

Here are the steps on how to use the Bronco hoist top:

Step #1: Plan the Installation

Before anything else, you need to plan out the installation of your Bronco hoist top. Make sure that the top is positioned directly to the vehicle. You can use tapes to make the exact positions.

Step #2: Install the Mounting Boards

The next thing you have to do for your Bronco hoist a top is drill the ceiling rafter attachment points. After that, you drill the mounting board and attach it to the ceiling.

Step #3: Install the Pigtail Lag Screws and Rafters

You now need to determine the pigtail lag screw location of your Bronco hoist a top. Mark the points, then drill 2 holes on each of the mounting boards.

Step #4: Install the Rope Organizer

In this step, you have to mount the riser board and drill house. Once you have accomplished that, you then need to assemble the rope organizers.

Step #5: Assemble the Hoister System

The final step of the process is to assemble the hoister system. To do this, install the welded screw eye. Suppose the distance from the front wall is too short, then you might want to consider running block and tackle the side of the object instead of doing it lengthwise.

Final Words

The steps on how to use the Bronco hoist a top can differ depending on the model of the vehicle. However, the steps mentioned above are the general process. There might just be slight changes in terms of pull capacity requirements and such.